hebang
/
/
polypropylene characteristics and uses

polypropylene characteristics and uses

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2022-08-20 09:41
  • Views:

(Summary description)

polypropylene characteristics and uses

(Summary description)

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2022-08-20 09:41
  • Views:
Information

Polypropylene is an encnomical material that offers an outstanding combination of physical, chemical, thermal and sustainable attributes .

 

1.Polypropylene comes in several different grades.

 

One of the wonderful, but confusing, things about pp is that there are several different grades of the same polymer and no two resins behave alike. While this may seem like complicated, the positive is that this gives us the opportunity to tailor the plastic to a customer exact application.

The three main grades of pp are homopolymer, random copolymer, and impact (or block) copolymer. Homopolymer PP is the most rigid of the the three. Random copolymer PP resins contain ethylene, which results in improved impact strength and softer feel compared to homopolymers. Similarly, block copolymer PP resins contain ethylene, but to a greater degree, resulting in a tougher material with excellent impact strength even at low temperatures. 

PolyPvc can provide all these three grade polymers.

 

2.Polypropylene is a semi-crystalline polymer.

Polypropylene is a semi-crystalline polymer which means that the plastic exhibits organized and tightly packed molecular chains. The areas of crystallinity are called spherulites and can vary in shape and size with amorphous areas exsiting between the crystalline areas. The degree of crystallinity affects many characteristics of the polymers. The semi-crystalline nature of PP is whats give this material it's hazy appearance in its natural state.

 

3.Polyethylene has a low weight and low density:

PP has the lightest weight of all polymers and it is also the polymer with the lowest density. What this means is that by making the switch, buyers of polypropylene can experience up to a 30% yield in turn translates to cost savings that is sent right back to the bottom line. In addition, because of the lightweight nature of this plastic, this translates to less solid waste by weight, resulting in a more sustainable solution.

 

4. Polypropylene has inherent barrier properties.

When working in the food packaging industry, oxyen and moisture barrier porperties are critical specifications.

When it comes to moisture, PP possesses inherent mositure barrier porperties. PP has a Moisture Vapor Transmission Rate (MVTR) of 0.5 (g-mil.100 in. 2/24hr.). MVTR is a measure of the passage of gaseous H2O through a barrier – the lower the rate, the longer the package protects its contents from moisture and ensures that moisture of the product remains the same. PP has the same MVTR as HDPE. As a basis of comparison, PS has an MVTR of 10.0, PET has an MVTR of 2.0, and PVC an MVTR of 3.0. This means, not only does the material keep unwanted moisture out, but it keeps moisture in, making it an ideal for food certain packaging applications, such as bakery applications, where it is important for the food to retain it’s moisture content. 

When it comes to oxygen barrier properties, PP is not traditionally seen as an effective oxygen barrier, but innovative enhanced oxygen & moisture barrier polypropylene solutions, such as ICPG's XPP Enhanced Barrier Polypropylene for Thermoforming and Form-Fill-Seal, as well as multi-layer barrier coextruded structures using EVOH, help to overcome this for applications that require enhanced shelf-life barrier performance. 

 

5. Polypropylene is recyclable.

9

Speaking of recycling, PP is an easily recyclable material with nearly all curbside programs in the US accepting this material. In fact, The Sustainable Packaging Coalition's  '2015-16 Centralized Study on Availability of Recycling report found that over 60% or greater of the US population has access to recycling programs that accepted PP rigid packaging. In addition, More Recycling and the American Chemistry Council's 2018 Non-bottle Rigid Plastic Recycling study reported PP rigid containers to have the second highest recovery rates next to HDPE (40%) at 36%.

 

Not only is this material recyclable, but there are many opportunities for diversion into other applications. Recycled PP is currently being used in applications such as battery cases, paint cans, home storage, flower pots, composite lumber and plastic furniture. And with it’s lightweight nature, PP products produce less solid waste by weight compared to other plastics. In addition, innovative new companies, such as PureCycle Technologies, have developed technologies that convert post-consumer recycled polypropylene (PCR PP) to a nearly virgin-like state. Considering all of these factors, you can be sure that when using PP you are making a sustainable material choice.

 

6. Polypropylene has excellent temperature resistance.

 

PP also has good temperature resistance making it an excellent material choice for microwave or hot fill applications. This is due to PP's high melting point - PP's operating temperature range goes up to 295°F, with a microwavable & hot fill temperature of up to approximately 260°F. As a basis of comparison, HIPS maxes out at around 185°F and PET maxes out around 160°F.

 

There are also certain grades of PP that can be used in cold temperature applications. For freezer grade or freezer to microwave applications, impact copolymer grades will give you the best resistance to cold temperatures while still retaining impact strength. Impact Plastics also offers specialty clarified impact copolymer PP grades for applications that require a balance of aesthetics and cold temperature impact properties.


7. Polypropylene can be clarifiled.

 

Studies have shown that customers prefer clarity, particularly in food packaging, so while all of these facts about PP sound great, without the visual appeal where does that leave us? As mentioned above, the semi-crystalline nature of PP results in a hazy appearance in it’s natural state.  With UltraClear polypropylene sheet this material can now be produced clarified.

 

Typically PP crystallizes slowly, forming complex crystals that prevent the transmission of visible light – hence the hazy appearance. The addition of the clarifying agent introduces additional sites for the crystals to grow. Because there are more crystals packed into the same space, the crystals grow smaller, allowing for light transmission and enhanced clarity. So now you can take advantage of all of the wonderful characteristics inherent to PP listed about while still achieving a part with the visual appeal desired by todays consumers. 

 

What's new

Understanding Copolymer Polypropylene in Plastic Fillers Industry
Understanding Copolymer Polypropylene in Plastic Fillers Industry
Discover the essential information about copolymer polypropylene, a key component in the plastic fillers industry. Learn about its properties, applications, and benefits in enhancing plastic materials
Detail
Discover the essential information about copolymer polypropylene, a key component in the plastic fillers industry. Learn about its properties, applications, and benefits in enhancing plastic materials
Exploring the Benefits of Using PP Random Copolymer in Injection Molding
Exploring the Benefits of Using PP Random Copolymer in Injection Molding
Discover the advantages of utilizing PP random copolymer in injection molding processes and how it can enhance the quality and efficiency of your manufacturing operations.
Detail
Discover the advantages of utilizing PP random copolymer in injection molding processes and how it can enhance the quality and efficiency of your manufacturing operations.
Understanding PP Random Copolymer Injection Molding Grade in Plastic Fillers Industry
Understanding PP Random Copolymer Injection Molding Grade in Plastic Fillers Industry
In the field of plastic fillers, PP random copolymer injection molding grade is a key term that professionals need to be familiar with. This article will provide essential insights and knowledge relat
Detail
In the field of plastic fillers, PP random copolymer injection molding grade is a key term that professionals need to be familiar with. This article will provide essential insights and knowledge relat
Enhancing Performance with PP Random Copolymer Injection Molding Grade
Enhancing Performance with PP Random Copolymer Injection Molding Grade
Discover how using PP Random Copolymer Injection Molding Grade can enhance performance in the chemical industry. Learn about the benefits, applications, and best practices for utilizing this innovativ
Detail
Discover how using PP Random Copolymer Injection Molding Grade can enhance performance in the chemical industry. Learn about the benefits, applications, and best practices for utilizing this innovativ

Have questions? We have answers !

留言应用名称:
客户留言
描述:
验证码

Hi,Create an environmentally friendly production enterprise

Contact us

Tel:0086-0379-67215688
Telphone:+86 17395927477
Email:sales@dazisuye.com

Web:https://www.dazisuye.com
Add:Nanlicun Town Industrial park,xin'an County,luoyang,471800,China

weixin
weixin

放样式的

放样式的

Time of issue:2022-08-06 11:27:16

© Luoyang Dazi Plastic Industry Co., Ltd.    Powerby: :300.cn