hebang
/
/
/
Everything You Need To Know About Polypropylene PP Plastic

Everything You Need To Know About Polypropylene PP Plastic

  • Categories:Industry trends
  • Author:dazi plastic
  • Origin:internet
  • Time of issue:2022-06-29 09:57
  • Views:

(Summary description)

Everything You Need To Know About Polypropylene PP Plastic

(Summary description)

  • Categories:Industry trends
  • Author:dazi plastic
  • Origin:internet
  • Time of issue:2022-06-29 09:57
  • Views:
Information

What is Polypropylene (PP), and What is it Used For?

Polypropylene (PP) is a thermoplastic “addition polymer” made from the combination of propylene monomers. It is used in a variety of applications to include packaging for consumer products, plastic parts for various industries including the automotive industry, special devices like living hinges, and textiles. Polypropylene was first polymerized in 1951 by a pair of Phillips petroleum scientists named Paul Hogan and Robert Banks and later by Italian and German scientists Natta and Rehn. It became prominent extremely fast, as commercial production began barely three years after Italian chemist, Professor Giulio Natta, first polymerized it. Natta perfected and synthesized the first polypropylene resin in Spain in 1954, and the ability of polypropylene to crystallize created a lot of excitement. By 1957, its popularity had exploded and widespread commercial production began across Europe. Today it is one of the most commonly produced plastics in the world.

 

CNC Cut Polypropylene Living Hinge Prototype Child Safe Lid by Creative Mechanisms

According to some reports, the current global demand for the material generates an annual market of about 45 million metric tons and it is estimated that the demand will rise to approximately 62 million metric tons by 2020. The major end users of polypropylene are the packaging industry, which consumes about 30% of the total, followed by the electrical and equipment manufacturing, which uses about 13% each. Household appliances and automotive industries both consume 10% each and construction materials follows with 5% of the market. Other applications together make up the rest of the global polypropylene consumption.

Polypropylene has a relatively slippery surface which can make it a possible substitute for plastics like Acetal (POM) in low friction applications like gears or for use as a contact point for furniture. Perhaps a negative aspect of this quality is that it can be difficult to bond Polypropylene to other surfaces (i.e. it does not adhere well to certain glues that work fine with other plastics and sometimes has to be welded in the event that forming a joint is required). Although polypropylene is slippery at the molecular level, it does have a relatively high coefficient of friction - which is why acetal, nylon, or PTFE would be used instead. Polypropylene also has a low density relative to other common plastics which translates to weight savings for manufacturers and distributors of injection molded Polypropylene parts. It has exceptional resistance at room temperature to organic solvents like fats but is subject to oxidation at higher temperatures (a potential issue during injection molding).

One of the major benefits of Polypropylene is that it can be manufactured (either through CNC or injection molding, thermoforming, or crimping) into a living hinge. Living hinges are extremely thin pieces of plastic that bend without breaking (even over extreme ranges of motion nearing 360 degrees). They are not particularly useful for structural applications like holding up a heavy door but are exceptionally useful for non load-bearing applications such as the lid on a bottle of ketchup or shampoo. Polypropylene is uniquely adept for living hinges because it does not break when repeatedly bent. One of the other advantages is that polypropylene can be CNC machined to include a living hinge which allows for faster prototype development and is less expensive than other prototyping methods. Creative Mechanisms is unique in our ability to machine living hinges from a single piece of polypropylene. 

Another advantage of Polypropylene is that it can be easily copolymerized (essentially combined into a composite plastic) with other polymers like polyethylene. Copolymerization changes the material properties significantly, allowing for more robust engineering applications than are possible with pure polypropylene (more of a commodity plastic on its own).

The characteristics mentioned above and below mean that polypropylene is used in a variety of applications: dishwasher safe plates, trays, cups, etc, opaque to-go containers, and many toys.

What are the Characteristics of Polypropylene?

Some of the most significant properties of polypropylene are:

Chemical Resistance: Diluted bases and acids don’t react readily with polypropylene, which makes it a good choice for containers of such liquids, such as cleaning agents, first-aid products, and more.  

Elasticity and Toughness: Polypropylene will act with elasticity over a certain range of deflection (like all materials), but it will also experience plastic deformation early on in the deformation process, so it is generally considered a "tough" material. Toughness is an engineering term which is defined as a material's ability to deform (plastically, not elastically) without breaking..

Fatigue Resistance: Polypropylene retains its shape after a lot of torsion, bending, and/or flexing. This property is especially valuable for making living hinges.

Insulation: polypropylene has a very high resistance to electricity and is very useful for electronic components.

Transmissivity: Although Polypropylene can be made transparent, it is normally produced to be naturally opaque in color. Polypropylene can be used for applications where some transfer of light is important or where it is of aesthetic value. If high transmissivity is desired then plastics like Acrylic or Polycarbonate are better choices.

Polypropylene is classified as a “thermoplastic” (as opposed to “thermoset”) material which has to do with the way the plastic responds to heat. Thermoplastic materials become liquid at their melting point (roughly 130 degrees Celsius in the case of polypropylene). A major useful attribute about thermoplastics is that they can be heated to their melting point, cooled, and reheated again without significant degradation. Instead of burning, thermoplastics like polypropylene liquefy, which allows them to be easily injection molded and then subsequently recycled. By contrast, thermoset plastics can only be heated once (typically during the injection molding process). The first heating causes thermoset materials to set (similar to a 2-part epoxy) resulting in a chemical change that cannot be reversed. If you tried to heat a thermoset plastic to a high temperature a second time it would simply burn. This characteristic makes thermoset materials poor candidates for recycling.

 

Why is Polypropylene used so often?

Polypropylene is used in both household and industrial applications. Its unique properties and ability to adapt to various fabrication techniques make it stand out as an invaluable material for a wide range of uses. Another invaluable characteristic is polypropylene’s ability to function as both a plastic material and as a fiber (like those promotional tote bags that are given away at events, races, etc). Polypropylene’s unique ability to be manufactured through different methods and into different applications meant it soon started to challenge many of the old alternative materials, notably in the packaging, fiber, and injection molding industries. Its growth has been sustained over the years and it remains a major player in the plastic industry worldwide.

At Creative Mechanisms, we have used polypropylene in a number of applications across a range of industries. Perhaps the most interesting example includes our ability to CNC machine polypropylene to include a living hinge for prototype living hinge development. Polypropylene is a very flexible, soft material with a relatively low melting point. These factors have prevented most people from being able to properly machine the material. It gums up. It doesn’t cut clean. It starts to melt from the heat of the CNC cutter. It typically needs to be scraped smooth to get anything close to a finished surface. But we have been able to solve this problem which allows us to create novel prototype living hinges out of polypropylene. 

What Are The Different Types of Polypropylene?

There are two main types of polypropylene available: homopolymers and copolymers. The copolymers are further divided into block copolymers and random copolymers. Each category fits certain applications better than the others. Polypropylene is often called the “steel” of the plastic industry because of the various ways in which it can be modified or customized to best serve a particular purpose. This is usually achieved by introducing special additives to it or by manufacturing it in a very particular way. This adaptability is a vital property.

Homopolymer polypropylene is a general-purpose grade. You can think of this like the default state of the polypropylene material. Block copolymer polypropylene has co-monomer units arranged in blocks (that is, in a regular pattern) and contain anywhere between 5% to 15% ethylene. Ethylene improves certain properties, like impact resistance while other additives enhance other properties. Random copolymer polypropylene – as opposed to block copolymer polypropylene – has the co-monomer units arranged in irregular or random patterns along the polypropylene molecule. They are usually incorporated with anywhere between 1% to 7% ethylene and are selected for applications where a more malleable, clearer product is desired.

How is Polypropylene made?

Polypropylene, like other plastics, typically starts with the distillation of hydrocarbon fuels into lighter groups called “fractions” some of which are combined with other catalysts to produce plastics (typically via polymerization or polycondensation).

Polypropylene for Prototype Development on CNC Machines, 3D Printers, & Injection Molding Machines:

3D Printing Polypropylene:

Polypropylene is not readily available in filament form for 3D printing.

CNC Machining Polypropylene:

Polypropylene is widely used as sheet stock for CNC machine manufacturing. When we prototype a small number of polypropylene parts we typically CNC machine them. Polypropylene has gained a reputation as a material that cannot be machined. This is because it has a low annealing temperature, which means that it starts to deform under heat. Because it is a very soft material in general, it requires an extremely high skill level to be cut with precision. Creative Mechanisms has been successful in doing so. Our teams can use a CNC machine and cut the polypropylene cleanly and with extremely great detail. In addition, we are able to create living hinges with polypropylene that have thickness as little as .010 inches. Making living hinges is a difficult endeavor on its own, which makes using a difficult material like polypropylene even more impressive.

Injection Molding Polypropylene:

Polypropylene is a very useful plastic for injection molding and is typically available for this purpose in the form of pellets. Polypropylene is easy to mold despite its semi-crystalline nature, and it flows very well because of its low melt viscosity. This property significantly enhances the rate at which you can fill up a mold with the material. Shrinkage in polypropylene is about 1-2% but can vary based on a number of factors, including holding pressure, holding time, melt temperature, mold wall thickness, mold temperature, and the percentage and type of additives.

Other:

In addition to the conventional plastic applications, polypropylene also lends itself well to fiber applications. This gives it an even wider range of uses that go beyond just injection molding. Those include ropes, carpets, upholstery, clothing, and the like.

What are the Advantages of Polypropylene?

Polypropylene is readily available and relatively inexpensive.

Polypropylene has high flexural strength due to its semi-crystalline nature.

Polypropylene has a relatively slippery surface.

Polypropylene is very resistant to absorbing moisture.

Polypropylene has good chemical resistance over a wide range of bases and acids.

Polypropylene possesses good fatigue resistance.

Polypropylene has good impact strength.

Polypropylene is a good electrical insulator.

What are the Disadvantages of Polypropylene?

Polypropylene has a high thermal expansion coefficient which limits its high temperature applications.

Polypropylene is susceptible to UV degradation.

Polypropylene has poor resistance to chlorinated solvents and aromatics.

Polypropylene is known to be difficult to paint as it has poor bonding properties.

Polypropylene is highly flammable.

Polypropylene is susceptible to oxidation.

Despite its shortcomings, polypropylene is a great material overall. It has a unique blend of qualities that aren’t found in any other material which makes it an ideal choice for many projects.

What's new

How Low Density Polyethylene Enhances Plastic Fillers
How Low Density Polyethylene Enhances Plastic Fillers
Explore the ways in which low-density polyethylene (LDPE) enhances the performance and properties of plastic fillers, and learn how this versatile material can improve the quality and durability of va
Detail
Explore the ways in which low-density polyethylene (LDPE) enhances the performance and properties of plastic fillers, and learn how this versatile material can improve the quality and durability of va
All You Need to Know About Low Density Polyethylene in Plastic Fillers
All You Need to Know About Low Density Polyethylene in Plastic Fillers
Discover the essential information about low density polyethylene in the field of plastic fillers. Learn about its properties, applications, and benefits for various industries within the chemical ind
Detail
Discover the essential information about low density polyethylene in the field of plastic fillers. Learn about its properties, applications, and benefits for various industries within the chemical ind
Exploring the Diverse Applications of Low Density Polyethylene
Exploring the Diverse Applications of Low Density Polyethylene
Discover the wide range of uses for low density polyethylene in various industries and learn how this versatile material can benefit your projects
Detail
Discover the wide range of uses for low density polyethylene in various industries and learn how this versatile material can benefit your projects
Exploring the Benefits of Low Density Polyethylene in Plastic Fillers
Exploring the Benefits of Low Density Polyethylene in Plastic Fillers
Discover the advantages of utilizing low density polyethylene in plastic fillers within the chemical industry. Learn about its properties and applications for enhanced performance and cost-effectivene
Detail
Discover the advantages of utilizing low density polyethylene in plastic fillers within the chemical industry. Learn about its properties and applications for enhanced performance and cost-effectivene

Have questions? We have answers !

留言应用名称:
客户留言
描述:
验证码

Hi,Create an environmentally friendly production enterprise

Contact us

Tel:0086-0379-67215688
Telphone:+86 17395927477
Email:sales@dazisuye.com

Web:https://www.dazisuye.com
Add:Nanlicun Town Industrial park,xin'an County,luoyang,471800,China

weixin
weixin

放样式的

放样式的

Time of issue:2022-08-06 11:27:16

© Luoyang Dazi Plastic Industry Co., Ltd.    Powerby: :300.cn